Hoops for Viking Designer 1&2 and Viking Designer SE machines

You can share hoops but not the bracket, table or table base from the Designer 1 & 2 machines with the Designer SE machine

4 Hoops to choose from or buy them all for incredible versatility!

How can your sewing machine use these hoops?

With a specially designed spacing base, we s-t-r-e-t-c-h your sewing machine apart! In addition to a factory approved extension cord that tricks your machine into thinking it is connected the normal way.

See how much larger your sewing field is!

Important:

• You must know how to use the software for your machine in order to use the hoops to their fullest potential. In order to fill in a complete hoop with a SOLID design, you must SPLIT designs so that the machine will accept the design. Until you have a complete understanding of your software you CAN use these hoops for simplified hooping and extra length.

• You must use our support table with the specially designed base in order to stretch the machine to the exact limit and to support the ennormous size of these hoops. Failure to use the recommended support table and base with these hoops can damage your machine's embrdoidery unit.

• Your work area must be large enough to hold the spacing base and to allow for the hoop to slide all the way forward and all the way back. To prepare your workspace be sure to have an area cleared that measures: 30" wide by 38" long.

Double-Wide Hoop Spacing Base with Extension Cord and Deluxe Front & Back Table Supports

Back table is removed, machine slid back and front table supports hoop in front as you embroider the first section of the hoop.

Back table is removed, machine slid back, hoop is removed from within the sliding bracket. Both the hoop and the designs are rotated 180 degrees. Hoop is re-inserted into sliding bracket and the front table supports hoop as you embroider the third section of the hoop.

If your table is large enough to leave both the front and back sections of the table in-place simply disregard the table refrences on the above instructions.

All of the following hoops, excluding the Big hoop that also embroiders on baseball caps use the same Attachment Bracket...So you only need 1 complete kit and then you can buy the other hoop frames separately to increase your hoop selection.

Thinking of upgrading your Designer 1 or 2 to the SE?

If you have a Designer 1 or Designer 2 machine and you intend to upgrade your sewing machines there are things you need to consider.

1) If you upgrade the software to the SE software there are no issues.
2) If you upgrade to a new embroidery unit, you will be required to purchase a new bracket for your machine in order to use the Hoop-It-All hoops (if you already have one).

3) If you decide to purchase for the first time a hoop-it-all hoop from any source, it is vital that you specify which machine model you have and what upgrades you have had installed on your machine or you will have conflicts with the hoops

Deluxe Quilter's Square Double-Wide Hoop Kit 11 7/8 " x 11 7/8" Sewing field. Includes Hoop frame, Bracket, Deluxe Support table, Spacing Base & 1 small roll of SIA Stabilizer. Item # for the Designer 1&2 Machines Item# VD1QDWK-D Cost $444.90 Quantity: Item # for the Designer SE Machines Item# VSEQDWK-D Cost $444.90 Quantity:

Deluxe Super Double-Wide Hoop Kit 11 7/8" x 19 5/8" Sewing field Includes Hoop frame, Bracket, Deluxe Support table, Spacing Base & 1 small roll of SIA Stabilizer. Item # for the Designer 1&2 Machines Item # VD1SDWK-D Cost $465.52 Quantity: Item # for the Designer SE Machines Item# VSESDWK-D Cost $465.52 Quantity:

Frames Sold separately can only be used if you already have the Spacing base, Support table & attachment Bracket. If you do not, refer to the kits above and then you can accessorize by purchasing additional hoops below. All 3 hoop frames fit into the same bracket and use the same support table. Square Quilter's Double-Wide Hoop ont> Frame Only Item# VD-QSDWf/o Price: $112.95 Quantity:   Super Double-Wide Hoop Frame Only Item # VD-SDWf/o Price: $133.58 Quantity:

Accessories Sold Separately

Spacing Base Item# VD1-Base Price: $182.68 Quantity:

Spacing Base Item# VSE-Base Price: $182.68 Quantity:

Attachment Bracket Item# Vd1-Bracket Price: $60.00 Quantity:

Attachment Bracket Item# VSE-Bracket Price: $60.00 Quantity:

Package Includes: Placement template Attachment bracket comes attached to this hoop. Illustrated Instructions 5 sheets of SIA stabilizer   H-1021 $126.15 Weight 1.0 lbs. Quantity: You can also order the Big hoop with cap sewing feature BIG HOOP with clamp to hold baseball caps in place Includes Instructions, Hoop frame, Attachment bracket and 1 small roll of SIA Stabilizer. Item # BH1021 Price: $139.68 Quantity: BIG HOOP Frame Onlyfor SE machines or D1 & D2 machines that have received bracket upgrade. with clamp to hold baseball caps in place Includes Instructions, Hoop frame, and 1 small roll of SIA Stabilizer. Item # BH1021A Price: $86.12 Quantity:   This hoop replaces the large hoop for your machine and makes it so you can sew a larger design than you currently can with the machine's large hoop. You can also use this hoop to embroider small designs. Order Replacement rolls of SIA now to save on shipping costs. Order 14.5" wide SIA for all three of the Double Wide hoops. Order 7.5" wide SIA for the meium hoop. Order 8.5" wide SIA for the Big and Super Giant-L hoops.