New Page 1


Place on back of Hoop to hold fabric in-place. Eliminates unsightly ring marks on velour and velvet and prevents damage caused by shifting of fine to heavy fabrics during embroidery. Allows you to embroider along collars and edges. Made from a secret blend of polyester fibers, (not paper) making this a permanent stabilizer to support and add body to embroidery. Unique adhesive ensures a strong bond to hoop. NOTE: Those of you that use SIA are use to seeing it with guide lines printed on the release liner. SIA no longer has guidelines printed on the liner. The stabilizer is the exact same, high quality product that you have grown to love. This change was made to prevent an otherwise necessary price increase. How do I cut it to fit my hoop now that the lines are gone? Lay the SIA over a rotary cutting table. Place the hoop on the SIA and cut SIA using the hoop in-place of your ruler.

Eliminates puckers when placed on top of fabric. Low price and High quality-available in a variety of roll sizes. Use with S-dSV for lace embroidery. Thick enough to use only one layer. Up to 300% stiffer than some water-soluble stabilizers. Completely washes-out when rinsed with tap water-within minutes. Some of you have been using the dSV on top of terrycloth to control the loops. After washing, the loops can find their way through the embroidery. To prevent this, use the dry Cover-Up in-place of dSV.

Use on top of fabric. Prevents fabric color from showing-through embroidery or changing the thread color. Tears-away-clean and doesn’t wash out! Cover-Up and fabric remain soft forever. Place on top of terrycloth to keep loops from popping through designs. The loops will not return as when using wash-away stabilizers! Lifts and adds dimension to designs.

This is the only water soluble stabilizer that has an adhesive on one side that also washes out in water. This is also great for sewing~ Use in place of a stay stitch. Use when ever sewing on beads or sequins on sheer fabrics. No other stabilizer works for this because when removing other temporary iron-on stabilizers the stitches tear.

	We have added Lube-A-Thread applicators and Lube-It-All dry silicone bottles sold separately. If your Lube-A-Thread has been attached to you machine for over a year, it is time to replace the attachment. Is your bottle of silicone running low? Be sure to not run-out or the thread will begin to split and fray again. If you have a Serger or a multi-needle embroidery machine you will how your stitch quality improves using a Lube-A-Thread silicone applicator after each of the tensions. Click Here

Baby 3D Pintucks (Tiny Tucks)

Machine Settings
Foot Pressure:      Lightest Setting (if your machine has pressure adjustment)
Thread Tension:    Normal (refer to manual)
Stitch Pattern:       Straight
Stitch Length:       1.5mm or 16 stitches per inch

Foot to Use:         Sequins 'N Ribbon
Guide to Use:        1/8"

Needle to Use: 2.0 80/12 Double/Twin needle

Instructions
Insert pearl cotton into small hole on 1/8" guide.
Adjust guide on foot until needles are centered and clear both sides of Pearl Cotton.

Sew! Sew around in designs, and have fun.........

Afraid to give credit card information online? You don't have to! Click here to see our ordering information page.

Privacy Policy

Creative Feet DOES NOT share or sell any of our customer's information/addresses. The advertisers below all have some relation to either sewing or crafts. Some sites like Abundant Earth, offer unique fabric, blank garments or unusual possible art or craft supplies. Each site has been approved by Clare and is found to have some products or services that might be of interest to our customers.











Interested in becoming a sponsor on Creative Feet's Newsletters? Click here to request information.