| All
of the Hoop-It-All hoops are a Single hoop frame
designed to be used with this stablizer making
it easy to embroider on
small items don't fit in the standard hoop like
socks, ties, straps and gloves.
With the Hoop-It-All you can embroider on fabric
as small as a dime,
because you don't have to stretch and tighten
the fabric into and between 2 rings.
|
|
 |
No
item is too thick or bulky to embroider
on. You can personalize even a dashboard
cover or eyeglass case with the
Hoop-It-all Hoops.
Hoop-It-All’s
no-ring hoop system allows the fabric to lay flat,
so your fabric is not stretched at all.
Embroidering
on sheer, see-thru fabrics or making lace it difficult.
To make sheer fabrics easy to embroider on, Hoop-It-All
developed a new water soluble stabilizer with a
water soluble adhesive. You stick the Sdsv
on the back of the hoop and away you sew!
How
does the Hoop-It-All™ hold the fabric, if it
doesn’t have 2-rings? Each
Hoop-It-All has a flat surface designed for use
with their SIA™
stabilizer. This stabilizer has a temporary adhesive
on one side and a removable release liner on the
other. You stick the SIA™ stabilizer to the
bottom of the Hoop-It-All™, this leaves a sticky
surface in the embroidery field area of the hoop
for your fabric to stick to. You simply lay your
fabric down and that’s it! Your fabric stays
put and when you’re done you simply tear your
embroidery
 
Medium
and Big Hoops
Also known as Cap Hoops
For most machines with automatic embroidery features.
These hoops vary in size to ensure a proper
fit for your sewing machine. Each of the hoops
are able to embroider on any item including
baseball caps. Sizes vary by machine. |
|
Giant
Hoop-It-All™
The original SQUARE Hoop frame Only for machines
with embroidery arm located on the right.
Other Square hoops are available, however they are called
Double-Wide Hoops as shown below. |
|
|
|
 |
These attachments are for the Super Double Wide and Quilter's Square Double Wide Hoops shown below and allow you to embroider on baseball caps without taking your hoop off the machine.
|
|
Giant-L
(long)
For machines with embroidery arm located on
the left and available by special order for
select machines that mount the hoop on the right
side of the machine.
Sizes vary by machine.
|
|
Super
Giant-L (long)
For select machines with embroidery
arm located on the left. |
|
|
|
Giant
R8 Hoop
This
hoop is designed for machines that mount the
embroidery hoop on the right hand side and
those machines that have an average sewing
field measuring approximately 4.0mm x4.00mm
and allows you to embroider up to 8 designs
in a single hooping. This hoop is Double the
width of your machine's hoop! |
|
| Double-Wide
Hoops |
|
For
machines with embroidery units on the left side. |
| These
hoops are DOUBLE THE WIDTH
of your machine's hoops click to see how this
is possible! |
 |
|
